Products
D5604B
Return to list pageCIF:352×288(PAL),352×240(NTSC)
Recording Resolution
PAL:CIF(352*288) NTSC:CIF(352*240)
Recording frame rate
PAL:100(CIF) NTSC:120(CIF)
Video Input/Output
4-CH Video input (Aviation special joint) / 1- CH output (RCA)
Audio Input/Output
2-CH Video input (Aviation special joint) / 1- CH output (RCA)
Alarm Input/Output
4CH alarm input (sensor triggered)/ 2 - CH alarm output
(Maxium drive current: 200Ma)
Otherwith function on shutdown delay, timer switch record, driving record,
switch rear view after reversing,single 32GB SD card storage
DEVICE PARAMETER |
D5604B |
Video System |
NTSC / PAL |
Compression Format |
Video:H.264 Audio:8kHz*16bit ADPCM |
Video Input /Output |
4-CH Video input (Aviation special joint) / 1-CH output (RCA) |
Audio Input /Output |
2-CH Audio input (Aviation special joint) / 1-CH output (RCA) |
Display Resolution |
CIF:352×288(PAL) 352×240 (NTSC) |
Frame rate |
Single CH PAL:25 fps ,NTSC:30fps |
Record Resolution |
PAL: CIF(352*288) NTSC:CIF(352*240) |
Record Frame rate |
PAL:100fps@CIF NTSC:120fps@CIF |
Image Quality |
Best / Good / Normal |
Record Storage media |
High-speed SD card (over SD4 speed) |
Power on/off mode |
power on while car ignition is on; |
Record Mode |
Always, Delay record while ignition is off, scheduled, |
Record Pack Time |
15/30/45/60 min (adjustable) |
Record backup |
Backup datas of SD card to PC via card reader. |
PC Client Viewer |
Netviewer |
Playback |
Playback, F. forward, Rewind, Slow play frame by frame. |
Alarm I/O |
4-CH alarm input (sensor triggered) / 2-CH alarm output (Maxium drive current: 200Ma) |
Alarm Mode |
Sensor Triggered, Video Loss, SD card full and SD card error |
PTZ control |
Embedded RS-485 port , and support PTZ control function. |
Software update |
Support SD card update |
IR Remote Control |
Support IR remote control |
Burglar alarm |
1 CH alarming/disalarming switch, 2CH sensor triggered alarm record |
Vehicle record function |
Support to record vehicle speed, reversing a car, braking, turning left/right |
Reversing Video switch |
Auto switch to CH-3 (Rearview mirror camera) display while reversing |
External interface |
Support DB37 joint to host |
Power Supply |
Wide range of Power Supply,DC 9V-32V; and repressible transient voltage reach 100V ;Power Output to external camera: 12V/1.5A |
Power Consumption |
Less than 10W,Sleep mode<300mw |
Operational Temperature |
-10℃~+40℃ |
Operational Humidity |
10%~90% |
Dimension(mm) |
141(L)*131(W)*35(H) |